|
Home  Products Cold Rolled Products Low Alloy Steel |
 |
LOW ALLOY STEEL
| CATEGORY |
STEEL
GRADE |
CHEMICAL COMPOSITION (%) |
Nearest Equivalent Specifications |
| C |
Mn |
S
Max |
P
Max |
Si |
cR |
| LOW ALLOY STEEL |
50 Cr V4 |
0.47 - 0.55 |
0.70 - 1.10 |
0.035 |
0.035 |
0.15 -0.40 |
0.90 - 1.20 |
51 CrV4
DIN EN
10132-4 |
| 125 CR 1 |
1.10 - 1.30 |
0.25 - 0.60 |
0.030 |
0.035 |
0.30 max |
0.20 - 0.50 |
125 CR 2
DIN EN
10132-4 |
Note:
- In these grades the percentage of Si and Al will depend the deoxidation practice adopted by the steel makers.
- In these grades, residual / tramp elements (such as Cr, Ni, Cu, Mo etc.) may be present depending upon the steel making practice followed by the steel makers.
- Besides the above, other grades in this category can also be supplied depending upon the order quantity and availability of appropriate raw material.
| CAPABILITY |
| LOW ALLOY STEEL |
| WIDTH: 6mm - 400mm |
Coil ID 150 / 300 / 400 / 450 / 500 mm depending on width and thickness |
| THICKNESS: 0.10mm - 3.0mm |
Sp. Coil wt. 0.50 to 6 kg per mm width depending on width and thickness |
|
|
